The Airport and the Environment

Personally, I believe all environmental impacts are important, that is why management looks for all mitigation strategies. Nevertheless, the environmental impact that presents the greatest concern for all airport managers around the whole world is the air quality and potential pollutant emissions. These gaseous emissions are potential effects on global climate change, air, and water quality.

The strategy to mitigate this environmental situation is organized through the aviation environmental protection (CAEP) and the International civil aviation organization (ICAO). Standards for emission certification of aircraft engines and emission certification are regulated through legislation (Visser & Wijnen, 2008).

Not only aircraft should be regulated, but also all the airports need to reduce air and water pollution. Reducing energy consumption, increasing the use of electric vehicles, and recycling are some of the various mitigation strategies that should be implemented in every airport. this would help air quality and a cleaner airport.


Visser, H., & Wijnen, R. (2008). Management of the environmental impact at airport operations. Nova Science Publishers, Incorporated.

Comments

Post a Comment

Popular posts from this blog

Aircraft Systems and Flight: Flight controls

 Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator, and rudder are the primary control system. Wing flaps, leading-edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane (FAA. n.d.). In my opinion, one of the hardest situations that a pilot can deal with is a primary flight control malfunction. An engine failure is a normal maneuver in every training, double engine failure can be challenging but you can glide. Losing the maneuverability of an airplane can be very challenging to fix, it can pull the pilot up, down, left, or right without any way to control it. If there are no flight controls, there is no way to fly in a controllable and safe manner.  A flight control malfunction can occur due to many reasons, it would mostly depend on how the system of each airplane is designed. A bird strike can do structural damage to this system. A trim motor o...
Read more

Weather hazards

 The greatest weather hazard is thunderstorms. At the cumulus stage, they are created when sufficient moisture and instability are present in the atmosphere. The clouds increase in vertical height and after it reaches a mature stage when rain or ice begins to fall. The dissipating stage is when the downdrafts spread out, with violent winds (FAA, 2016). A thunderstorm can extend all the way to 60,000 ft and it can create wing updrafts and wind shear, which is a rapid change in wind velocity and/or direction at a very short distance. Precipitation, visibility, and ceiling are affected by thunderstorms. Thunderstorms reduce visibility, and ceiling which are necessary for pilots to land. It can also create squall lines, tornados, turbulence, icing, hail, and engine water ingestion (FAA, 2016), risking any flight that encounters one. All this affects the go no go decision. This proves the importance of aviation weather services for students, private, and professional pilots so they can ...
Read more

Legislative Acts

In aviation history, there are plenty of acts and regulations that have helped shaped the aviation industry. In my opinion, the federal aviation act was the most important legislative act that goes hand with the standardization center. In August 1958, President Eisenhower signed the Federal aviation act into law, to create the federal aviation agency (FAA, 2022).  The FAA is in charge of issuing and enforcing regulations. Furthermore, standards cover manufacturing, operating, and maintaining the aviation industry (FAA, 2022). Before the FAA was created, the standardization center existed to establish uniformity in the inspection and methods for examination for all types of pilot certificates. The creation of this organization that now is only one altogether promotes safety, develops new technology, and provides standardization in this field. The aviation industry and professional aviators are supposed to follow these rules so all crews can understand each other without ever meeting...
Read more